[UNI] DASHBOARD.INC (торговля 28 парами с одной доски)

[DENYA]

Спойлер

1.ПИН можно вешать на каждую пару в отдельности. В ручном режиме регулировать НА КАКОМ пивоте будет вход (и выход), тем самым в полуручном режиме подстраиваться под рынок."
разработчик ПИНА JagzFX_EAX_SnR_v1_04 предусмотрел такую возможность, почти все другие пины разрабатываются для всех 28 пар сразу.
(click to show/hide)
ПИН JagzFX_EAX_SnR_v1_04 же работает как на 28 пар сразу, так и может работать только на 1 валютную пару. В настройках мы сами выбираем.
Но я с тобой согласен, такой полуручной метод управления всеми 28 валютами - это геморрой и нагрузка на процессор. Не наш метод )
Цитировать
Из твоих нескольких последних постов я понял следующее:
1. Мы хотим скальпировать (т.е. быстро открывать и закрывать позиции, получая пусть небольшую прибыль, но как можно чаще) предположительно, на М1-М5 (в силу максимальной доходности такого трейдинга).
2. Мы хотим скальпировать доской (в силу ее очень широких функциональных возможностей).
3. Мы хотим скальпировать доской по стратегии, которая одинаково эффективна в тренде и во флете (ни много ни мало это грааль в чистом виде :-) ).
4. У нас есть более-менее четкие правила входа в позицию по уровням пивот (в силу их большей, судя по наблюдениям, эффективности по сравнению с уровнями фибо).
5. У нас нет более-менее четких правил выхода из позиции.
6. Все изложенное мы хотим зашить в пин (несколько пинов).
1.Да. М5 подойдет.
2.Да. Не в силу "возможностей" а в силу экономии времени. Скальпинг то по одной паре у тебя заберет целый день БЕЗ значимых перерывов на другие дела, про скальпинг 28 пар в ручном режиме я вообще молчу. Поэтому доска - это продвинутый продукт помошник, чтобы автоматизировать или полуавтоматизировать торговлю.
3.Одинаково эффективно в тренде и флете торговать невозможно. А что возможно, так это крыть убытки, если точно знаем что попали в "другой тип" рынка. Учитывая, что флет 80% времени, 15% времени тренд и 5% времени обвал, то самое эффективное - это искать стратегию для флета или небольшого тренда. Вариант стратегии СВИНГ - идеальное решение. Свинг - это англоязычный термин стратегий, по которым мы продаем вверху, покупаем внизу. Русскоязычная альтернатива - неваляшка, перевертыш .. итд. Свинг от уровней - очень эффективен. А отсекать тренд и обвал мы можем ПРАВИЛАМИ: 1.Торговать не дальше S|R3, ибо если цена подошла к S3, то это уже движение выше среднедневного. А если уже S4 и далее, так это явно уже обвал. 2.Иметь стопы на каждый ордер. Настраиваем на доске, предположительно СЛ=60% АДР хватит чтобы не выбило их при нормальном движении и выбило при резком выстреле, то есть в тренде или обвале.
4.И прайсэкшн и скальпинг и свинг схожи чем? ВХОД ОТ УРОВНЯ!!!! между уровнями это просто ЗОНА. Зона движения цены от одного уровня к другому. Прайсэкшн трейдеры уровни рисуют сами, в скальпинге же из-за требования в скорости принятия решения уровни рисуют как правило индикаторы. Есть Sup&Dem уровни, фибо, круглые числа, традиционные пивоты, другие пивоты (кармилья, модифицированный, мюррей ... итд). Так вот есть исследования 15 летней истории котировок, по большому количеству инструментов, в них я увидел эффективность ОТСКОКА именно от пивотов традиционных, нежели фибо (не в обиду Davit-у это будет сказано (разработчику самой перспективной стратегии на ФФ по торговле от пивотов)).
5.Выход из сделок. А вот тут "знающие" очень опытные трейдеры тебе все в один голос скажут: Войти в сделку легко, в разы труднее ВЫЙТИ из сделки. Это в ручной торговле. В автоторговле за нас думает машина, но к сожалению мало кто из прогеров продумывает варианты выгодного выхода. Как я вижу, пока оптимально выходить на центральных пивотах. Посмотри мои скрины. НО! в текущей реализации пин на центральном пивоте не выйдешь. Надо допиливать пин.
6.Да.

Цитировать
Что сразу бросилось в глаза:
1. Пин на каждую пару - это 28 досок как минимум с одним пином, что выглядит не очень реальным.
2. Ручное определение уровней - это целый процесс, требующий времени и постоянного внимания (анализ, решение, выставление ордеров и т.д.), т.е. получится не совсем скальпинг. В таком случае зачем доска с ее функционалом, если перебирать сетапы придется вручную?
3. Выяснить, насколько глубока кроличья нора, можно только упав в нее. Фонариком посветить, скорее всего, не получится в силу отсутствия сколько-нибудь адекватных фонариков (это ж грааль, как-никак). А поскольку, судя по твоим наблюдениям, затяжной тренд=убытки, понять размер убытков можно будет только по факту.
4. Если вовремя не закрывать с минусом просевшие позиции и усредняться, то сразу появляются шансы выстроить сетку усредняющих ордеров, а если это еще и долгий тренд, то сетка может стать паутиной. Это может быстро перевести нас из М1-М5 в Д1, а то и в недельки. И это тоже получится не совсем скальпинг. Плюс усреднение с мартингейлом - стремно, без мартингейла - долго (особенно если тренд затяжной или цена двигалась сильно).
Наверное, компромисс тут не пройдет, придется расставлять приоритеты.
1.Согласен. Нам нужен 1 пин под все пары. Именно поэтому он ждолжен быть универсальным: а)расчет зоны не в пунктах, а в %АДР
2.Согласен. Все должен делать пин. Уровни определяет пин на основании стандартных пивотов. (допилить JagzFX надо свой пин)
3.Режем убытки. Стоп на ордера, запрет открытия на пивотах дальше 3 (S3, R3).
4.Усредняться с мартином итак не можем, нет в доске такого функционала. Если усредняемся равными ордерами, то выход по пивоту же никто не отменял (на дневки не перейдешь ...), при касании пивота вся сетка ордеров и закроется. Просто по моим наблюдениям, смотри скрины, если уже больше 4-х ордеров в сетке - закроемся с 90% вероятностью в минус. Опять же выход: а)настраиваем доску на открытие не больше 3-х ордеров по паре.

Смотрел на досуге сегодня, часть проблемных частых входов в "выстрел" можно избежать добавлением фильтра JagzFX_EAX_TDI_MTF_v1_06.ex4

Ок, спасибо, основные вопросы понятны.

Поставил к пину JagzFX_EAX_SnR_v1_04 фильтр по свечам.

https://prnt.sc/j1m3j5
https://prnt.sc/j1m1wu
https://prnt.sc/j1m2j8
https://prnt.sc/j1m2y4

свечной фильтр ааабсолютно лишний. У тебя же разворотная стратегия, а не трендовая. Убирай, результаты будут лучше.
Защитный стоп в пунктах меняй на защитный стоп в %АДР. ТП=15%АДР, 1 ордер на пару хммм ... это скальпинг прям.

Не совсем одобряю твои настройки. Поясни логику, что хотел получить?

[ss_g]

свечной фильтр ааабсолютно лишний. У тебя же разворотная стратегия, а не трендовая. Убирай, результаты будут лучше.
Защитный стоп в пунктах меняй на защитный стоп в %АДР. ТП=15%АДР, 1 ордер на пару хммм ... это скальпинг прям.

Не совсем одобряю твои настройки. Поясни логику, что хотел получить?

Исходил из следующих соображений:

Пивот поставил дневной, т.к. предпочтение коротким т/ф, следовательно, и канал выбирал не широкий.
Импульсы с разных т/ф совпадают ненадолго, вероятнее всего, как раз на время жизни импульса с младшего т/ф., т.к. цена в основном движется волнообразно. Если они совпали, и в это время пин дает сигнал на вход, значит, скорее всего такое совпадение было локальным экстремумом, после которого должно следовать обратное движение, которое может продлиться не только на М15, но и на М60, т.е. впереди может быть запас хода.

Я ставил стоп в 15%АДР, но тогда стопы срабатывали чаще, и убыток был больше. Исходя из того, что стратегия флетовая, и мы ожидаем, что цена снова вернется на очередной круг, маленький стоп закроет позицию раньше, чем повторится волна в пределах канала. Привязка стопа к АДР в силу разной волатильности пар может дать по некоторым медленным парам также маленький ход для цены. Стоп в 500 пипсов за полтора дня сработал 6 раз, общая сумма убытка около 20 долларов.

Позиция держится от нескольких минут примерно до 10-12 часов, большинство закрывается в пределах 1,5-2 часов. Для скальпинга, конечно, долго, но и фильтр пока по свечам от М15 до М60.

Попробую с понедельника убрать свечной фильтр, посмотрю, что выйдет.

[studentapro]

1. У кого работает ПИН EAX_MovingAveragesv1.00 ?
У меня слетает с графика. Если есть рабочий, выложите, пожалуйста. Свой прикрепил.

2. Нa Exness c DBMASMEAX007a3 кто-нибудь работает? У Exness нет 2 пар из 28. Прописывал пары в доске руками, котировки перегружал, автоопределение пар включал/отключал. Результата нет. Пишет недостаточно истории или пары нет в окне обзора. Было у кого-нибудь и как победили?

EAX_MovingAveragesv1.00.mq4
Screenshot_1.jpg
Screenshot_2.jpg
Screenshot_3.jpg

[DENYA]

1. У кого работает ПИН EAX_MovingAveragesv1.00 ?
У меня слетает с графика. Если есть рабочий, выложите, пожалуйста. Свой прикрепил.

2. Нa Exness c DBMASMEAX007a3 кто-нибудь работает? У Exness нет 2 пар из 28. Прописывал пары в доске руками, котировки перегружал, автоопределение пар включал/отключал. Результата нет. Пишет недостаточно истории или пары нет в окне обзора. Было у кого-нибудь и как победили?

2.В первом посту есть ответ на твой вопрос. Если лень читать, то: http://tlap.com/forum/torgovye-sistemy/2/uni-dashboard-inc-torgovlya-28-parami-s-odnoy-doski/9345/?do=findComment&comment=231965

---

УСТАНОВКА:
1.Скачать архив с прикрепленного к посту файла.
2.Распаковать содержимое архива в папку с установленным МТ4. МТ4 должен быть установлен в любую папку КРОМЕ ProgramFiles! Например на C://FOREX/MT4/.
3.Убедиться, что в окне "Обзора рынка" присутствуют все 28 валютных пар + золото. Если нет - добавить недостающие. Лишние валютные пары необходимо удалить из "Окна обзора".
4.Открыть график по Золоту (XAUUSD), любой таймфрейм.
5.Загрузить историю всех пар. Для этого просто перетаскиваем скрипт ForceLoadHistoricalData в открытое окошко по любой паре. Все! Котировки по всем парам автоматом загрузятся.
6.Перетащить на открытый график (рекомендую график золота Н1) советник Dashboard - Currency MeterV3Pb1041.
7.В настройках советника загрузить СЕТ. Например сет [DB Set11][02.09.15][Clipi v3p1011].set

Если у вас не отображаются данные на панеле доски, то есть 2 не описанных причины этого:
1.Если у вас в терминале НЕ ВСЕ 28+Gold ПАРЫ, то придется вручную через запятую прописывать все (кроме той которой нет) в свойствах советника пары, для этого:
а)В параметре Use the default 28 pair ставим false
б)Прописываем через запятую все пары в параметре Comma seperated own pair list.
2.Необходимо периодически менять доску на новую. К проекту разработки доски подключено 4 опытнейших программиста, поэтому СКОРОСТЬ появления новых версий ошеломляет. Все новые версии досок можно найти тут: http://tlap.com/forum/torgovye-sistemy/2/uni-dashboard-inc-torgovlya-28-parami-s-odnoy-doski/9345/

[studentapro]

Denya, спасибо за ответ.

Проблема решена!

Может кому пригодится:
когда прописывал пары вручную, писал их с суффиксами - вид EURUSDe. А нужно без суффикса - вид EURUSD. Доска суффикс определяет сама.

trabl_AUDCAD.jpg
trabl_AUDCAD2.jpg
No_suffiks.jpg

[ss_g]

Убирай, результаты будут лучше.
Защитный стоп в пунктах меняй на защитный стоп в %АДР. ТП=15%АДР

В понедельник убрал свечной фильтр, стоп поставил по АДР... Стопов стало в разы больше, общий результат - минус
http://prntscr.com/j44s7x

Сильно уменьшилась просадка http://prntscr.com/j44tyl, но с учетом общего результата это не радует. Как будто вся просадка конвертировалась в минуса :-)
Возможно, что изменение настроек просто совпало с рыночной ситуацией, потому вышел минус. А возможно, фильтр к этому пину действительно нужен.

[michaelrab]

хочу поделиться с хорошыми резултатами....
очень долго искал индикатор што даст сигнал на закрытия позиции и случайно наткнулся на HP DIFF ...
после 2 недел работы с индикатором я просто влюблён внего.
я не знаю как он работает и какие параметры у него но он дает сигнал почти на максималном уравне импулса.
проверял толко на 5 минутке .

HP_DIFF.ex4

[DENYA]

Новая версия доски DBMASMEAX007a3.bundle3 rev.update.012.9c4ß1

Переведите нововведения. Часть из них я предлагал внедрить, поэтому особо рад вот такому:

Цитата

Only [Auto] add orders upon profit +/- criteria, replacing "Only add to profitable".

Теперь сеткопостроение становится возможным. Надеюсь автор быстренько внедрит еще и Мульт. Чтобы была возможность построения сетки+мартин.

Changelog:

Спойлер

DBMASMEAX007a3.bundle3 rev.update.012.9c4ß1 (20180413):

+ Maximum exposure to a currency: Maximum amount of orders on the very same currency.

=================================================================
DBMASMEAX007a3.bundle3 rev.update.012.9c4ß (20180412):

+ Weekly session (server time based) replacing 24x5 hardcoded all day (local time) session

+ Allow [Auto] add orders in opposite direction of existing ones

+ Only [Auto] add orders upon profit +/- criteria, replacing "Only add to profitable"

+ Free margin level % threshold to open new trades...

+ Equity/Balance % threshold to open new trades...

+ PINS extended to 9.

Some fixes nor improvements, and new bugs as usual as well...

Test drive release expiring on the next new year's eve GMT.

=================================================================
DBMASMEAX007a3.bundle3 rev.update.012.9c3 (20180316): Bug-fix update

! Fixed? https://www.forexfactory.com/showthread.php?p=10858825#post10858825

Minor fixes nor improvements, and new bugs as usual as well...

=================================================================
DBMASMEAX007a3.bundle3 rev.update.012.9c (20180304): Bug-fix update

- Rename allowed, but only adding to the original name (undocumented addition of 012.9)
- Check for StopFlag temporarily removed (undocumented addition of 012.9)
+ Button for 'Close trades on session(s) end' in sessions box
+ Sessions shows an ® to the right of their status in sessions box when set to reset EAX.

! Fixed? https://www.forexfactory.com/showthread.php?p=10833419#post10833419

! Fixed? https://www.forexfactory.com/showthread.php?p=10833687#post10833687

Other minor fixes nor improvements, and new bugs as usual as well...

=================================================================
DBMASMEAX007a3.bundle3 rev.update.012.9b (20180227): Bug-fix update

! Fixed? bug that close trades on EAX start when «Close trades on session(s) end» is enabled
! Fixed? CSM/RT header wasn't show as enabled on EAX start when set as enabled in properties

=================================================================
DBMASMEAX007a3.bundle3 rev.update.012.9a (20180226): Most relevant since last update...

! Minor fixes regarding missing objects

=================================================================
DBMASMEAX007a3.bundle3 rev.update.012.9 (20180223): Most relevant since last update...

+ Option to try to get rid of indicators (if any) in chart window at load time.
+ PINS have a feed presence color. (hardcoded by now).
+ Spread value modifiable on-screen live.
+ Maximum value for ADR
+ Maximum value for CDR

~ SL in PiPs/%ADR changed its behaviour and is like the Basket SL introduced in the version 006b,
a negative number is required to effectively do as SL, otherwise it will act as kind of PL, but
beware that selected order(s) must be already in profit to PL to work or it will fail.

! Fixed? https://www.forexfactory.com/showthread.php?p=10542078#post10542078

! Fixed? https://www.forexfactory.com/showthread.php?p=9588252#post9588252

! Fixed? https://www.forexfactory.com/showthread.php?p=9497576#post9497576
https://www.forexfactory.com/showthread.php?p=9577973#post9577973
https://www.forexfactory.com/showthread.php?p=10793525#post10793525
https://www.forexfactory.com/showthread.php?p=10794045#post10794045
https://www.forexfactory.com/showthread.php?p=10794103#post10794103

! Fixed? https://www.forexfactory.com/showthread.php?p=9586739#post9586739

! Some preset names changed in SESSION and ENVIRONMENT sections, thus earlier .set would require revision.

Other minor fixes nor improvements, and new bugs as usual as well...

=================================================================

DBMASMEAX007a3.bundle3 rev.update.012.8 (20161220):

! Fixed news hold filter not properly working when news level = None.

DBMASMEAX007a3.bundle3 rev.update.012.8 (20161219):

Most Relevant since last update:

+ Reverse the RSI signal (only as preset by now).
+ Experimental Close orders on news hold start
(affected symbols only by now). [Auto], [Close] and [N] required.
+ Experimental Hold filter scope: "hold %ADR(10) since last open order"

! Fixed news hold filter not properly working with hidden basket block.

Other minor fixes nor improvements, and new bugs as usual as well...

=================================================================

DBMASMEAX007a3.bundle3 rev.update.012.7 (20161111):
! http://www.forexfactory.com/showthread.php?p=9247988#post9247988
! http://www.forexfactory.com/showthread.php?p=9247458#post9247458

=================================================================

DBMASMEAX007a3.bundle3 rev.update.012.7 (20161110):
! http://www.forexfactory.com/showthread.php?p=9246097#post9246097
! http://www.forexfactory.com/showthread.php?p=9245159#post9245159
! http://www.forexfactory.com/showthread.php?p=9240003#post9240003

=================================================================

DBMASMEAX007a3.bundle3 rev.update.012.6 (20161101):
! http://www.forexfactory.com/showthread.php?p=9229076#post9229076
! http://www.forexfactory.com/showthread.php?p=9230115#post9230115

=================================================================

DBMASMEAX007a3.update12 (20161023):

~ Hold filter:
+ Scope: hold «bars,period» since last open order [experimental]
Comma separated «bars,period». Period can be any regular
time-frame or a custom off-line one (by now, to properly
work with off-line charts, they should be open.
- Define "hold minutes since last [...] order" [H] scope
+ Define "hold minutes since last open order" [H] scope
+ Define "hold minutes since last closed order" [H] scope
- Define "one order per bar (order [...] time)" [H] scope
+ Define "one order per bar (order open time)" [H] scope
+ Define "one order per bar (order close time)" [H] scope
+ Define "hold «bars,period» since last open order" [H] scope

~ Charts:
- Timeframe to open a new chart
- Template to use when opening a new chart
+ Use «template,timeframe» to open charts [NEW WAY]
Comma separated «template,timeframe». The two removed
inputs merged into this one, where «timeframe» can be
any regular time-frame or a custom off-line one as long
as it's available.

~ Interface:
+ Edit box for «template,timeframe».
+ Informative box for Sit-On-Hands scopes.
+ Color for «Exit(close) on opposite signal» (default=Gainsboro).
+ Color for «Exit(close) on absent signal» (default=Black)
+ Color for «Exit(close) on lost signal» (default=DimGray)
+ Profit, Account and Clock are now movable just like Sessions, MTS and News.
~ Other minor changes/updates.

Pay attention to Hold and Chart sections while importing
ancient presets since some definitions there had to be renamed.

Updated releases of MADdash and BidRadio PINS with reverse option added

=================================================================
DBMASMEAX007a3.update11 (201610141356):

~ Attempt to have a better integration between close/exit scopes.

When using mixed exit modes/scopes, all have to match... unless
it's enabled the «Close on any enabled close/exit alert» feature.

!! Fixed?
http://www.forexfactory.com/showthread.php?p=9196137#post9196137

=================================================================

DBMASMEAX007a3 (201610100323): Most Relevant since last update:

+ PINS only mode (hide all - not disabling) added.
+ Preset for the Enable trigger on any enabled Close[C] alert.
+ PINS exit scope added: lost signal (in default color scheme, [X] is dimmed).

Mixed exit modes/scopes requires the «Close on any enabled close/exit alert»
feature to be enabled ([ANY] button right over [Close] or it related preset).

!! Fixed?
http://www.forexfactory.com/showthread.php?p=9174845#post9174845
http://www.forexfactory.com/showthread.php?p=9182281#post9182281
http://www.forexfactory.com/showthread.php?p=9179793#post9179793
http://www.forexfactory.com/showthread.php?p=9181138#post9181138
http://www.forexfactory.com/showthread.php?p=9188136#post9188136

=================================================================

DBMASMEAX007a3 (20161002): Most Relevant since last update:

+ Close matching ANY enabled close/exit alert.
+ RS exit on opposite signal and reverse it own signal [EXPERIMENTAL].
+ BQR exit on opposite signal and reverse it own signal [EXPERIMENTAL].
+ Button for the auto-close filter based on order PiPs offset.
+ Buttons to Show/Hide News and Clock.
+ News, Sessions and MTSA boxes can be moved by dragging them with the mouse.
How-to: Hover the box until read a "double-click to make it movable" tool-tip
and do what it says. A white dot will appear on the top left corner of that box
indicating that it's ready to be dragged to wherever you want.
+ Hold entry till next bar (selectable time-frame).
+ PINS extended to 6.
+ Experimental PINS only mode (disable all but PINS module).

Some minor additions/corrections/amendments/adjustments...
Bugs nor issues fixed and probably new ones introduced... as usual ;)

=================================================================
DBMASMEAX007a3 (20160923): Bug-fix update

Fixed?: (it seems it only happens when having a custom symbols selection)
! http://www.forexfactory.com/showthread.php?p=9156617#post9156617

=================================================================
DBMASMEAX007a3 (20160922): Bug-fix update

Fixed?:
! http://www.forexfactory.com/showthread.php?p=9156077#post9156077
! http://www.forexfactory.com/showthread.php?p=9141815#post9141815

Improved/extended (scope chooser #2 could be removed if found redundant due to new scopes)
~ http://www.forexfactory.com/showthread.php?p=9155436#post9155436

Added (draft, disabled by default)
+ http://www.forexfactory.com/showthread.php?p=9141738#post9141738

=================================================================
DBMASMEAX007a3 (20160908): Bug-fix update

GAP: Fixed exit on opposite signal issue (http://www.forexfactory.com/showthread.php?p=9126374#post9126374)
BQR: Arrows mean [preview] (http://www.forexfactory.com/showthread.php?p=9115905#post9115905)

=================================================================
DBMASMEAX007a3 (20160902): Bug-fix update

Fixed Profit Tracker displaying today trades in yesterday's row.

=================================================================
DBMASMEAX007a3 (20160901): Most Relevant since last update:

Bundle package including new versions of all files (files of any previous bundle or update can be discarded).

Extract files preserving all sub-folders.

! Fixed bug in PIN exit/close on absence of signal in reverse mode.

Other minor bugs nor issues fixed and surely new ones introduced... ;)

=================================================================
DBMASMEAX007a2 (20160829): Relevant since last update:

+ [Auto] Close[C] allowed after session hours (default=true).
+ Hide alerts surpassing allowed spread threshold (default=false).
+ Snapshot auto-size to current chart window (default=true).
+ PINS exit/close scope added: absence of signal. [EXPERIMENTAL]
[X] highlighted (default: red bg, white fg) = opposite signal (scope so far)
[X] dimmed down (default: red bg, black fg) = absence of signal (added scope)
+ PSO: Daily Open Bar to watch: Current-Previous2 (default=Current).
+ Expert properties by clicking the Smiley at top left.

Bugs nor issues reported by users (and fixed):
http://www.forexfactory.com/showthread.php?p=9065724#post9065724
http://www.forexfactory.com/showthread.php?p=9078473#post9078473
http://www.forexfactory.com/showthread.php?p=9081183#post9081183
http://www.forexfactory.com/showthread.php?p=9103938#post9103938

Other bugs nor issues fixed and probably new ones introduced... as usual as well ;)

=================================================================
DBMASMEAX007a1 (20160727): Relevant since last update:

+ Improved integration with external PINS, mostly related to auto-placement.

=================================================================
DBMASMEAX007a0 (20160727): Most relevant since last update:

+ Reverse the CCI signal (only as preset by now)
+ Enabled directional arrows to RSI and CCI.
+ Showing MaxH and MaxL per pair while hovering the orders block rows.
~ Reworked Strength% and Bias directional arrows.
~ NewsCal and NewsBrk became disabled by default (both can be enabled from properties or loaded standalone).

+ Included an experimental Indicator/PIN 'DBMASMEAXPIN_BRdash_v001' to play with:
I have it in the following folder: '{MT4_Data_Folder}\MQL4\Indicators\PINS'
by now but it can be in any place as long as it's under 'Indicators' tree.
It has it own color scheme hard-coded by now, and it can inherit whatever
color scheme you have set in your EAX (running EAX required of course).

! Some bugs fixed and probably new ones introduced... as usual ;)

=================================================================
DBMultiASMdevX006g3 (20160721): Relevant since last update:

I've noticed that MT4 build 988 changed the way it deals with objects
tool-tips, thus this update is to adapt to that new MT4 behaviour.

=================================================================
DBMultiASMdevX006g2 (20160719): Relevant since last update:

This is a bug-fix revision related to what was reported in the following posts:
http://www.forexfactory.com/showthread.php?p=9035628#post9035628
http://www.forexfactory.com/showthread.php?p=9037981#post9037981

=================================================================
DBMultiASMdevX006g1 (20160717): Most relevant since last update:

+ Buttons to interactively increase/decrease won/lost basket(s) targets.
+ Comma separated symbol(s) list to auto-deselect at start.
+ Maximum price slippage for open and close orders can be set separately.
+ Own News Calendar report reworked.
+ PTZ: Option to enable/disable R1/R2 as LongsTZ and S1/S2 as ShortTZ (was hard-coded enabled).
+ FTZ: Option to enable/disable High to +200% as LongsTZ and Low to -200% as ShortsTZ (was hard-coded enabled).

! Several improvements or minor additions and some new bugs as usual as well.

=================================================================
DBMultiASMdevX006g0 (Not released): Most relevant since last update:

This was mostly a bug-fix revision.

+ Shows last order open and close time while hovering the orders block rows.

! Many bug-fixes and some new ones as usual as well.

=================================================================
DBMultiASMdevX006g (20160304): Most relevant since last update:

+ Button to take snapshot of current screen state [SS]. A pop-up alert will show where it was saved and under what name.

+ Button to enable [BDM] charts pop-ups if dashboard is set to be used as [DASH] in BDM.

+ Set [TP|SL] buttons are now independent of each other so you can set one not messing with the other. A combined [TP&SL] is available as well.

- Clear TP/SL button removed because setting [TP&SL] to 0 has the same effect now.

+ Most on-screen increase/decrease arrows replaced by edit boxes.

+ Basket Profit Lock levels modifiable on-screen live.

+ Sessions can be enabled/disabled on-screen live.

+ Experimental persistence of most of the settings that can be modified on-screen.
Any persistent setting have precedence over EA preferences settings.
This experimental feature is magic number based, thus you can have different persistent settings using different magic numbers.

~ Pivot points Trigger Zone [PTZ] filter (experimental):
+ MN1 (in addition to previously added D1 and W1).
+ Option to make this filter to act as trigger.
+ Option to make R3/R4+ a ShortsTZ and below S3/S4+ a LongsTZ.
+ Narrow version to save screen space.

~ Fibonacci Trigger Zones [FTZ] filter (experimental):
+ MN1 (in addition to previously added D1 and W1).
+ Option to make this filter to act as trigger.
+ Option to make above +200% a ShortsTZ and below -200% a LongsTZ.
+ Narrow version to save screen space.

+ Filter based on CSM/RT with strong and weak currencies levels.

+ 3BQ module, showing direction based on 3 time-frames comparing each one to CSM/RT.

+ Bias shows two additional time periods (medium and long term - can be hidden/disabled).

+ Maximum PiPs offset to allow [Auto] [Close] (order PiPs has to be greater than specified to effectively take action).
This a very experimental feature intended to cut potentially bad orders at their early stage, and allow your own trades
manager (i.e. DashTZ) take over those that surpass the specified level (suggested by braintheboss).

! Fixed bug reported at http://www.forexfactory.com/showthread.php?p=8785489#post8785489

! Some other bugs that I managed to catch since previous revision were resolved and probably new ones were introduced as well :)

=================================================================
DBMultiASMdevX006f2 (20160216): Most relevant since last update:

! Fixed an issue found in the new and experimental filter on previous[p] candle bar direction check that won't properly update in some cases.
If you didn't experienced issues, you can skip this update.just ignore this update.

=================================================================
DBMultiASMdevX006f1 (20160214): Most relevant since last update:

! Fixed bug reported in http://www.forexfactory.com/showthread.php?p=8752022#post8752022

+ One column/arrow Base|Quote [BQ] opposite direction trigger (experimental).
Might replace the prior one based on two columns/arrows (base and quote).
Both are intended to have the same behaviour and can be hidden, only differ by their cosmetic design.

+ Experimental filter based on Previous[p] candle bar direction.

=================================================================
DBMultiASMdevX006e4 (20160211152308): Most relevant since last update:

~ Strength% time-frames not correctly displaying their updated value after changing them in EA properties has been corrected.

! Some other bugs that I managed to catch since previous revision were resolved and probably new ones were introduced as well :)

=================================================================
DBMultiASMdevX006e3 (20160209105559): Most relevant since last update:

~ Bulk Set and Clear TP/SL changed it behaviour: Only orders with [SYMBOL(s)] enabled will be affected.

+ Current Daily Range [CDR] module.

+ BidRatio module [BidR%] with new way of displaying data +/- 100 (old one using 0 to 100 is still there).

+ Pips Since Open [PSO] have an upper limit now.

+ Pairs HeatMap% [HM%] have upper limits now.

+ PINS extended to 5 levels.
+ PINS exit on opposite signal can be standalone enabled now.
+ PINS reset button.

+ GAP exit on opposite signal.
+ GAP reverse it own signal.

+ Hard coded Session0: 24x5 (00:00:00 to 23:59:59).

+ Take snapshot at close (experimental): basket close and orders closed by exit on opposite signal.

~ Disabled[D] filter experimental scopes added: Pivot nor Fibonacci no trigger zones.
Pivot nor Fibonacci filters should not be hidden for these new scopes to properly work.

+ Pivot points Trigger Zone [PTZ] filter (experimental): W1 (in addition to previously added D1).
Two hard-coded trigger zones: Pivot to R2 for Longs[L] and Pivot to S2 for Shorts[S].
It will show a text (and tool-tip) representing where the current bid price is in relation to Pivot/S&R.
Avoid trades around levels by the specified amount of PiPs. Requires the PTZ filter enabled or to be selected as Disabled[D] filter scope not hiding PTZ.

+ Fibonacci Trigger Zones [FTZ] filter (experimental): D1 and W1.
Two hard-coded trigger zones: High to High+100(+200) for Longs[L] and Low to Low-100(-200) for Shorts[S].
It will show a text (and tool-tip) representing where the current bid price is in relation to levels.
Avoid trades around levels by the specified amount of PiPs. Requires the FTZ filter enabled or to be selected as Disabled[D] filter scope not hiding FTZ.
Values for upper and lower levels are hard-coded by now and are as follows:
Target 6 = 100.0 % ( Upper T6 = High+T6% | Lower T6 = Low-T6%)
Target 5 = 76.4 % ( Upper T5 = High+T5% | Lower T5 = Low-T5%)
Target 4 = 61.8 % ( Upper T4 = High+T4% | Lower T4 = Low-T4%)
Target 3 = 50.0 % ( Upper T3 = High+T3% | Lower T3 = Low-T3%)
Target 2 = 38.2 % ( Upper T2 = High+T2% | Lower T2 = Low-T2%)
Target 1 = 27.2 % ( Upper T1 = High+T1% | Lower T1 = Low-T1%)
Target 0 = 0.0 % ( Upper T0 = High+T0% | Lower T0 = Low-T0%)

+ Strength% time-frame added.
+ Strength% time-frames can be interactively enabled/disabled.
~ Strength% was not properly obeying upper limit on triggering.

+ MA time-frame added.
+ MA time-frames can be interactively enabled/disabled.
+ MA period is time-frame independent now.

+ Candles: very experimental reverse signal of each individual time-frame.

! Open chart button bug fixed (it sometimes loaded a chart in the EA one, unloading it).

! Some sanity checks added (experimental). Needs further testing.

~ Suffix auto-detection improved (needs further testing).

+ Close[C] button to allow/deny triggering of exit alerts when in [Auto] mode.

!!! Important notes about exit on opposite signal:
It requires [SYMBOL], [Auto} and Close[C] enabled to effectively close the matching orders.
If multiple [X] are enabled, all must match to produce a close alert (perhaps a match-any could be added later?).
Close alerts will be shown in Close[C] column and only on symbols having orders matching the criteria.

+ New script to load historical data: [MQL4\Scripts\LoadHistory-1 script(ASM)].

~ Updated DBMultiASM_MADdash_PIN_v2.0 supporting 5 PINS. Overwrite the already installed one [MQL4\Indicators\PINS].

As usual ... many bug fixes and some new ones as well ...

=================================================================
DBMultiASMdevX006d1: Since last update:

~ Pivots calculations when Monday has been corrected.
~ Strength% module was not properly obeying upper limit at colouring its values and has been fixed.

=================================================================
DBMultiASMdevX006d: Since last revision:

+ Experimental trigger on Base|Quote arrows direction. (This might replace the current behaviour of [D]isabled filter).
Base increasing and Quote decreasing triggers longs.
Base decreasing and Quote increasing triggers shorts.

+ Very Experimental filter based in Pivots Points and Trigger Zones [PTZ].
There are two hard-coded trigger zones: Pivot to R2 for Longs and Pivot to S2 for Shorts.
It will show a text (and tool-tip) representing where is the current bid price in relation to Pivot/S&R.
There are options to avoid trades around Pivot/S&R by the specified amount of PiPs when the filter is enabled (this could be a separated filter).

~ Disabled[D] allow to choose if filter on 'SameDirection' or 'NotOppositeDirection' of Base|Quote arrows.
Until now it was filtering on 'SameDirection' only. This filter might be deprecated or replaced.

~ Magic number can be updated directly in the panel (experimental).

! Bug in session management has been fixed.
! Bug in Basket SL when used as interactive Profit Lock has been fixed.
! Bug in Basket Lock showing incorrect lock values in some scenarios has been fixed.

~ Time to end of daily session replaced by Broker server time (clock).

Several minor improvements or additions and some new bugs as usual as well.

=================================================================
DBMultiASMdevX006c: Not released

=================================================================
DBMultiASMdevX006b: Most relevant since last bundle/update...

The most important update is related to resources usage, it is now much lighter in CPU usage.

~ Basket SL in $ changed it behaviour and to effectively work as SL, a negative number is required, otherwise it will work as an interactive profit lock.
~ Basket TP in $ allow negative numbers now.

TP or SL in Pips or %ADR are unchanged by now, thus positive numbers must be used for either one.

~ Dashboard update time interval fixed.

+ Print slippage and time spent to place the order.

+ Time to end of daily session time (clock).

+ Pivot container now shows warning when price is around PL or R3/S3 (it isn't a filter, only a visual by now).

+ Pivot container now shows R3, R2, R1, PL, S1, S2 and S3 values in tool-tips.

+ Orders requiring TP/SL are opened with their corresponding stops now, so if an "invalid stops" error is returned by the server, the order is immediately rejected.
This is a big improvement over previous revisions where this was a two steps procedure. (orders placed with no stops and TP/SL set afterwards, ending with some orders -due to TP/SL too close to price- with no stops where a stop should have been placed). This modification aims to fix the referenced issue, rejecting orders with invalid stops in real time.

Some cosmetic changes because I'm not really happy yet with it current design.

As usual ... many bug fixes and some new ones as well ...

=================================================================
DBMultiASMdevX006a: Since last update...

* Stop trading after basket(s) amount set in preferences was not properly working in devX006.
This update aims to fix this issue. Please report back if it doesn't.

=================================================================
DBMultiASMdevX006: Since last bundle/update...

Pairs:
+ Filter what pairs are allowed to operate directly from the dashboard.
This means that we can now choose which pairs we want to let the EA to consider when in auto-mode.
The default in this revision is all unselected, and an option to auto-enable all is included in properties.
+ [ALL/NONE] (for all pairs) button at header of pairs container has been implemented to perform bulk enable/disable of pairs.
This button will select or deselect all based on last action taken.
+ Basket buttons to enable/disable pairs in the dashboard implemented.

Filters:
~ ADR filter was not properly filtering and has been fixed.
+ Narrow pairs HeatMap version added and its default now. It now supports all the 9 regular time-frames as well.
+ BidRatio upper and lower limits for trigger.

HeikenAshi:
+ HA options to allow the user to select what time-frames to be used for direction directly at EA preferences.
+ HA TF buttons changed it behaviour, time-frames can now be selected live to enable them to be used for direction.
+ HA filter button changed it behaviour a little bit as well, now it is more like the Candles button is.
+ Choose the HA candle for open/close comparison.

Summarizing how the HeinkenAshi module will work in this revision: the time-frame buttons will enable each time-frame
to be used for direction matching, but they will not activate the filter by themselves (as in the previous release),
to do so, the main HeikenAshi button must be used (requires at least one time-frame enabled for direction).

Parabolic SAR [NEW]:
+ Parabolic SAR covering all regular time-frames. (HA must be disabled by now because of an issue I'm trying
to figure out how to handle, so for the time being, both cannot be activated at the very same time)
+ Choose the PSAR candle for PSAR/open comparison.

Candles:
+ Buttons to enable/disable time-frames for direction matching without having to go to preferences.
This can be updated live now. These tiny buttons have tool-tips that will help on identify their time-frame.

News:
+ Option to open news URL when a pair/currency displays news alerts.
This has been added to the two news modules available right now.
The news URL can be customized in preferences. The default is the Forex Factory one.
~ Rewrite most of the news module (bugs fixes and optimization, and probably new bugs)

Charts:
+ Dedicated button to open charts [~]
+ Button to open charts of all selected pairs [+] at header of the new charts module (it might be relocated afterwards)
+ Button to close charts of all selected pairs [-] above the previous buttons (it might be relocated afterwards)
+ Basket buttons to open all pair charts of the given currency.

Sessions:
+ 4th session added.
+ Option to reset/preserve data between sessions
+ Option to reset/preserve data when back from preferences
+ Reset lot size when clicking on it own button.
+ Session shows as closed while in weekend. Needs further testing.

Other:
+ Many tool-tip's improved
+ This revision should be more CPU friendly. If you have issues regarding high CPU usage, HeatMaps and indicators (HA in particular) are very CPU intensive.

As usual ... many bug fixes and some new ones as well ...

=================================================================
DBMultiASM(10230)devX201511272338b:

+ Tool-tips added to many elements, mostly to the new ones and to the ones I have found to be more important... so most are self explanatory...

+ Gauge bar intended to measure the market tendency/sentiment. It is an experiment based on pure mathematics over the market data stream (it still has room for enhancement).

! A bug not auto-enabling filtering on HA when enabled in settings was found and fixed.
! An issue related to the possibility to enable/disable individual HA time-frames once the HA filter is active is now resolved.

=================================================================
DBMultiASM(10230)devX201511191252:

This is mostly a bug fix update related to the news alerts that were not being cleared in basket block neither in pairs rows when they should.
If you still find this update too buggy, please stick to the previous one that works for you while next comes. I have some on going things I don't want to mix.

=================================================================
DBMultiASM(10230)devX201511182007:

The most important thing on this update is that it seems that I managed to fix the issue related to the news alert being deactivated/activated again during news releases time. I kept a close eye during latest news releases and it did pretty well here, so let's see how it does there. I wouldn't post an update yet if it weren't for that ugly bug...

+ NewsCal can be used from inside the Dashboard. NewsBrk as well. Both indicators required (and included in package).
NewsCal is the default news "viewer" in this update, but the previous one can be selected instead.
+ Allow to choose if auto-add magic number to order comment. [NEW] Needs further testing.
+ Allow to choose maximum size of order comment. It will be trimmed to specified size if greater. [NEW] Needs further testing.
+ Added new clock (external one dropped)
+ LongAll and ShortAll buttons added. Needs further testing.
+ Shows range since last D1 (Last Hi&Lo as well). Needs further testing/checking, review and "design"
+ Many tool-tip's added. Needs to add more though... in progress..
+ News column impact will be colored based on chosen impact when in the on-hold time window. Needs further testing/checking.
+ News alert on basket module added. Needs further testing/checking.
+ News blocking mechanism reworked and fixed. Needs further testing.

=================================================================
DBMultiASM(10230)devX201511161356:

Some new things added, mostly related to usability, like...

+ Enable/Disable modules done (almost any column can be disabled/hidden).
+ Screen-shot at order open added (screen-shot will be saved in "MQL4\Files\DBMultiASM\" folder).
+ TP/SL in Pips added to the interactive box (please note that Pips overrides %ADR, in case you set both, Pips will take precedence).
+ Experimental MADdash based Heat-map for basket and general purpose. (MADdash must be loaded on any regular chart, have global variables setting enabled and the time-frames you want to be "read" selected). Colouring this HeatMap is in progress.
+ Experimental CSM Heat-map for basket and general purpose. I've set it to be the default, but it can be changed in preferences.
+ Text box to have a brief description of current settings added.

Some other minor fixes and features I don't recall right now were added, and new bugs as well

=================================================================

DBMultiASM(10230)devX201511131601.deploy:
DBMultiASM(10230)devX201511132329.update:

Nothing really new, this is mostly a bug-fix release. I spent most of the time in a sort of bugs-hunting session.

Among others, I was reviewing the news module and made some changes that I expect to do better next week.

I have also added a very experimental MTF CSM for both, basket and general purpose, by the way, Modoki is still the default on both. CSM should be chosen in options (independent options for basket and general one) and if so, it will be displayed in place of Modoki, so in this release, both cannot be displayed at the very same time. If you want both, enable MTF_CSM and load your own Modoki (If you want it and don't have one yet, it is easy to find by using the paperclip at the top of the page or you can also find it in the package of the first upload I made)

Mandatory bug-fix update added. Fixed bug reported in #Post 12380 here. Install fist package first, then overwrite EA with the one in the latest package.

=================================================================
DBMultiASM(10230)devX201511091622:

Sadly, the reported issue related to news (placing orders during the hold after news time, with the [N]ews header enabled and red [N] in the respective pair row) is intact, so it needs more testing to try to find what's wrong with it. While doing a visual review of the code I didn't found anything looking bad yet, BTW I'll keep an eye on it since I want it to be confident or not to be.

I have also added some toys to try and test if they worth being improved.. like a GAP alerts counter (needs work and fine tuning yet... I'm thinking on adding a sort of buffer in time before increasing count and to use as filter like... to place an order only after N alerts in the same direction... or after a change in GAP direction is detected or so.. open to ideas).

Another toy to play with is something to allow the dashboard to receive alerts of external indicators in other charts. To achieve this, the required indicator(s) should be adapted to allow inter-operation with the dashboard. A good sample scenario for that would be to import alerts exported from something like MADdash., btw, AFAIK, it doesn't export it alerts and it source code is not available to be adapted. Anyway, it doesn't have to be an MTF indicator (better if it is, of course.. less chart windows), it can be any indicator on any regular pair chart window. This feature is immature and still under heavy-development and is not enabled by default since it needs indicators to be adapted and it stills doesn't work as a filter to auto-trade yet, it only shows alerts provided by adapted indicators loaded in other chart windows by now.

! major bug in MA arrows fixed.
! major bug in Candles highlighting fixed.

The H|D|N boxes at the left of the Currencies/Basket block are only representative by now and will not show anything in this version.

=================================================================
DBMultiASM(10230)201511050110: initial release

2018-04-15_16-14-34.png
2018-04-15_15-41-14.png
DBMASMEAX007a3.update012.9c4B1.zip
2018-04-16_0-32-18.png

Изменено 15 апреля, 2018 пользователем DENYA

[trnd]

Уважаемые трейдеры, подскажите пожалуйста, если кто знает. Я тестирую последнюю версию доски (012.9). При установке в настройках уровня стоп-лосс, без разницы по ADR или в пунктах, доска перестает открывать сделки. При использовании версии 012.8 (терминал и брокер тот же) такой проблемы не было. В чем может быть проблема?

[DENYA]

Уважаемые трейдеры, подскажите пожалуйста, если кто знает. Я тестирую последнюю версию доски (012.9). При установке в настройках уровня стоп-лосс, без разницы по ADR или в пунктах, доска перестает открывать сделки. При использовании версии 012.8 (терминал и брокер тот же) такой проблемы не было. В чем может быть проблема?

Возможно баг. Изложи этот вопрос в том числе на скринах. Отправлю разработчику. Кроме того ВСЕ деяния доски фиксируются в логах. Можешь там посмотреть о причинах неоткрытия ордера ...
=====================================

Кроме того изучи ченджлог, возможно найдешь ответ на твой вопрос, например:

Цитата

~ SL in PiPs/%ADR changed its behaviour and is like the Basket SL introduced in the version 006b,
a negative number is required to effectively do as SL, otherwise it will act as kind of PL, but
beware that selected order(s) must be already in profit to PL to work or it will fail.

Изменено 19 апреля, 2018 пользователем DENYA

[ss_g]

Покой нам только снится...
Прибыль по АДР, стоп - фиксированный в пипсах.
Средний размер просадки вдвое больше прибыли.
До конца недели держу эти настройки, с понедельника как минимум уменьшу стопы до -10 пипсов. Может, еще какие-то мысли возникнут при анализе торгов.
http://prntscr.com/j7ovas
http://prntscr.com/j7ox1a

[trnd]

Со стоп-лоссом разобрался. Нужно ставить минус перед значением SL в настройках. Теперь доска открывает сделки. Благодарю DENYA за помощь.

[sniv]

Правленая версия пина по пинбарам.
(В предыдущей ,при установке на минутки, тело свечи в расчетах могло становится равным нулю,, почему в общем то и выскакивала ошибка)
Можно опробовать

Pinbars-PIN-EAX.mq4
Pinbars-PIN-EAX.ex4

[Ramghan]

по моему надо сделать реверс))) Сделки открываются в противоположном направлении...

Снимок.PNG

[sniv]

)

Pinbars-Reverse-PIN-EAX.mq4

[Ramghan]

Осталось подобрать хорошую стратегию по пин бару и в бой)
мне одному так с пином не везёт?)

Снимок.PNG

Изменено 24 апреля, 2018 пользователем Ramghan

[sniv]

Странно) - попробуй перекомпилируй в metaeditor. Или просто использовать собранный вариант

Pinbars-Reverse-PIN-EAX.ex4

[Ramghan]

Странно) - попробуй перекомпилируй в metaeditor. Или просто использовать собранный вариант

Спасибо, этот отлично работает, как надо =d> Можно приниматься за тесты...

---

Добавлено: 25-04-2018 05:26:37

---

Может быть добавить фильтр в пин, сколько свечей держать сигнал? Или даже лучше, кол-во пипсов в расчете от адр каждой пары, какое должно пройти цена после пин бара. Таким образом мы внедрим сюда вход отложенным ордером, как и полагается по работе с пин барами. Изменено 25 апреля, 2018 пользователем Ramghan

[ss_g]

Осталось подобрать хорошую стратегию по пин бару и в бой)
мне одному так с пином не везёт?)

На скрине видно два активных пина: один реверс, а второй какой?

[Ramghan]

Осталось подобрать хорошую стратегию по пин бару и в бой)
мне одному так с пином не везёт?)

На скрине видно два активных пина: один реверс, а второй какой?

Тестирую в паре с пивотами, что выкладывал Деня ранее. Пин бар и пивоты, я думаю должны быть перспективными

Снимок.PNG
Снимок2.PNG

[papalam72]

Комрады, подскажите пожалуйста
Как сделать так, чтобы настройки измененные мною прямо с доски (ТП и СЛ к примеру с использованием кнопок) записывались в пресет? После моих изменений кнопками на доске и перезагрузки терминала все изменения слетают

[DENYA]

Комрады, подскажите пожалуйста
Как сделать так, чтобы настройки измененные мною прямо с доски (ТП и СЛ к примеру с использованием кнопок) записывались в пресет? После моих изменений кнопками на доске и перезагрузки терминала все изменения слетают

настрой ТП и СЛ внутри самой доски. Советник/настройки. Тогда ничего не слетит.
Лично я ВСЕГДА по умолчанию ставлю автоторговлю как выключенной. И активирую ее нажатием соответсвующей кнопки на самой доске.
СЛ и ТП всегда настраиваю внутри советника.

Кроме того, есть более эффективные решения по управлению стопами, тейками, тралами ВСЕХ ордеров по всем парам сразу. Лучший вариант - это APTM. Считается королем в своем классе, безотказный, стабильный, рулит сразу всеми ордерами, хочешь по отдельности, хочешь как корзиной ...

[DENYA]

Прикрепил APTM

Спойлер

feb. 2, 2015
This is the revised second version, adapted to all new build functionalities, more simple (I hope) to use and liberated from not very useful functions. For Basket management you find a separate EA there -->
simple allPairBasketManager
I programmed this APTM for assisting and managing manual- and to trades from other EA's.
It is a multipair trademanager, just set the APTM on one chart and it will manage all open trades ,if you set TradeAllOpenPositions=true, setting this to false, you can enter a list of magic numbers and the APTM will only manage open trades with the specific magic numbers. The APTM can too exclude older trades from managing.
Set doNotManagePositionsOpenedBefore to true for using this functon
enter the date in Format YYYY.MM.DD with doNotDate
It is OOTB set to manage all trades. If you want to use it with with the ticket number setting isManageByTickeNumber=true TicketNumber here you must input your ticketnumber you wish to manage(after partclose the trademanager knows automatic the new one and will use this automatic)
Attention make sure you have set ManageAllOpenTrades to false if you want to use other management options, as ManageAllOpenTrades overwrites all other settings !!
You can too select new ManageByOrderComment and give an OrderComment CommentOfOrder
for orders you want to manage, too in this case the trade-manager will know after part close(s) what order to manage.
You can new as many wished in past, let the APTM manage the only position from the symbol the EA is attached at.
The new build uses the OnTimer function, set with checkSeconds the intervals the APTM uses for checking all open trades, note 0 will mean check every second.
Inputs for the jumping/trail stop function.
Use_SetBEAndJumpset this to true if you want to use the function
BEProfitPips added to OpenPrice for BE
JumpStepPips the SL will be moved with every trail step
SLMinDistanceToPricethis distance must the moved SL have to the actual price
MoveSLOnlyIfWin if set to true the SL will only be moved after the EA has set the BE and the position is in profit(this is OOTB and is same as prior version did use the JS).
PartCloseEnabled, if you set this to true and PartCloseWithBE is set to true and Use_SetBEAndJump is true, the EA will close the % you selected with PartClosePercent when setting the BE.
Too we have PartClose as First TP function. You can select this if you have PartCloseEnabled set to true and PartCloseAsFirstTP set true. PartCloseFirstTpPips set here the pips the order must be in win for the PartClose.
You have the possibility to deactivate all ATR inputs with one input this was asked from users for making the ATR functions more easy to handle DoNeverUseATR set this to true, and the EA will use all your manual inputs, if it is set to false, you can select which calculation you want done by ATR and for which you want to use your manual inputs.
As always ask, if you have problems to understand all functions..
update feb.04,2015
New user input showAlerts, set this to false and you will deactivate most alerts, note essential alerts , like autotrading disactivated ecc.. will be still shown, as they are there to advise you that the APTM will not work as intended..
update feb.05,2015
new input showDisplayBox=true if you set this to false, you see the user-display in the "old" way, without box and transparency, so you have now three possibilities:
-NewBoxDisplay Design
-Old fashion style with transparency UserDisplay
-Display will not be shown
New the alert function will always have included "APTM:", avoiding, if you use to the HiddenPendingEA or other EAs , confusion which EA is alerting and did an operation...
update Feb. 07,2015
as requested from many users, better UserDisplay now showing the selected settings ecc. making the handling much easier, too the userOptions are now more easy to understand, please ask if you are unsure how to use the APTM that it performs what you want.
march 4th,2015
the function that moves the SL if MoveSLOnlyIfWinis set to false, is recoded for avoiding with some settings strange behaviour, thanks to a spot from Over60, in addition, using the HiddenPendingEA. No this function should work under all circumstances perfectly.
march 21th,2015
Added new optional to move SL to BE with the PartClose as firstTP independend of the SLMinDistanceToPrice
To use this optional (OOTB ist is deactivated) set SetBEonPartCloseFirstTP to true. Note you must have enabled PartCloseAsFirstTP and PartClose in general must be enabled..
march 28th,2015
Update with new functions:
UseCloseFriday, if you set this to true the APTM will close all orders opened by this EA at FridayCloseHour you set and FridayCloseMinute (used is the broker time)
UseCloseAllAtDefinedTime, setting this to true the APTM closes at the user defined time all open trades use CloseHour and CloseMinute to set your wished time. Used is broker time.
New Trailing is more flexible as you have the possibility for different SLMinDistance inputs for the BE setting and the JumpingStop function, as always you can let APTM let this calculate with the ATR.
These are the modified inputs:
SLMinDistanceToPriceBE pips NewSL at BE must have distance to price
SLMinDistanceToPriceJS pips NewSL after moving SL must have distance to price
atrMultiplicatorForSLMinDistanceToPriceBE
atrMultiplicatorForSLMinDistanceToPriceJs these are used if you let the APTM automatic second ATR calculate.
apr.19th,2015
Update with new functions:
If you set enableCloseAllButton to true (like it is OOTB) you see new a red "CloseALL" Button, just hit this button and the APTM will close all open positions. ATTENTION there is no confirm asked for this operation it is a one click close all. NotDeletePendingOrdersWithCloseAll setting this to true, theAPTM will not delete the pending orders.
AUDUSDH4.png

apr.22th,2015
Update for better performance if you use ManageOnlyActualSymbol=true, the APTM will no be now faster in most cases in all operations. Note you must too set ManageAllOpenTrades=false, if you want the APTM to use a single-pair TM. Too the problem alerting if you use the CloseALL button is fixed, you will not have for every position to close have an alert, but only one time. (Only if you have the alerts activated)
apr.28th,2015
As many users asked for adding the possibility of using MA as SL I have decided to add this option to the APTM. It is easy to use as setting useMAasSL to true will automatic adapt all other settings to work perfect with this setting. Note: If your trade is against the MA directed the APTM will use an emergeny SL and not close your trade, this is a security feature. The basic MA SL will only be moved if the MA moves in direction of your trade. If you use it with ManageOnlyActualSymbol=true ( remeber to set ManageAllOpenTrades=false) the user display will show you the actual used MA value. You are free to choose the MA-type, period, TF and shift you like.
The new inputs are:
CODE: [SELECT ALL]
extern string SLset2="---MA as SL Settings----";
extern string SLset3="---this will set the MA as SL----";
extern string SLset4="---this will disable all incompatible settings----";
extern string SLset5="---like ATR-SL,SetBEandJump automatic----";
extern bool useMAasSL=false;
extern int MaTimeFrame=240;
extern int MaPeriod = 55;
extern int MaMethod = MODE_SMA;
extern int MaAppliedPrice = PRICE_CLOSE;
extern int MaShift=1;

Too this version is enhaced, if you use ManageOnlyActualSymbol=true ( remember to set ManageAllOpenTrades=false) , the closeALL button will now only close the trades of the trades with the actual symbol the display show only the trades in this pair ecc. Note as single pair TM you can use on every pair a different APTM instance if you want.
update version 2.19
may 2th 2015 fixes problems with some settings and pending orders, that caused the EA to stop working
after hitting the CloseALL button.
update version 2.26
may 27th 2015
This is a major updating presenting new functionalities. New you can enter your SL/TP/BE/JS/SLMinDistance values in AccountCurrency, APTM will this convert into pips for setting SL TP ecc....
For using this setting set useAccountCurrValuesForSL_TP_BE_JS to true note that this will adapt automatic other settings so that incompatible settings will be automatic deactivated (like ATR calculations).
New the APTM has too the possibility to use a basket SL/TP, for using this set UseBasketSLTP to true.
Here all new inputs (OOTB all false):
CODE: [SELECT ALL]
extern string special="---Special AccountCurrency defined SL/TP BE Settings---";
extern string special2="---This deactivates automatic incompatible Settings like ATR---";
extern bool useAccountCurrValuesForSL_TP_BE_JS=false;
extern double SLAccountCurr=25;
extern double TPAccountCurr=75;
extern double BEProfitAccCurr=4;
extern double JumpStepAccCurr=15;
extern double SLMinDistanceToPriceBEAccCurr=20;
extern double SLMinDistanceToPriceJSAccCurr=25;
extern string special4="---Special Basket TP/SL Option in Account Currency---";
extern bool UseBasketSLTP=false;
extern double BasketSL=2500;
extern double BasketTP=7500;

update version 2.28
june 11th 2015
New Basket SL/TP option, new you can use too an value in pips instead of a value in account currency as it was requested by some users, the new inputs are:
UseBasketSLTPinPips set this to true if you want use pips and not account currency, note you must set UseBasketSLTP to true for using the Basketfunctions in your APTM
BasketSLinPips here you enter you wished pips value for the basket SL
BasketTPinPips same for the TP
update version 2.29
june 24th 2015
new version has now a Reset SL&TP button, if you use this button APTM resets all SL&TP for the manages trades to 0 and if you have set the auto SL&TP calculation for true, APTM will recalculate for all positions the SL& TP, too some little perfections inside the APTM
GBPUSDH1.png

update version 2.30
aug 5th 2015
Global asked for a new function, that will remove the TP, if the trade is x pips distante from TP and the SL is already set in win. You will find this new settings:
CODE: [SELECT ALL]
extern string bejsSet2="---Note Tp will only be removed if SL is in win----";
extern bool useRemoveTPifPriceIsNearTP=false;//set this to true to use the new function
extern double RemoveTPdistanceToTPpips=25;// here enter your wished distance that will delete the TP

Note APTM will recognize that it has removed the TP and will not oevveride the deleted TP, if SetInitialTakeProfit is set to true.
update version 2.31
sep. 2nd 2015
if showAlerts is set to false, now all not really essential alerts are not shown.
update version 2.32
sep. 11th 2015
more detailed informaiton about the ATR tf,period and multipliactor, if you use ATR for automatic dynamic calculations of TP/SL/BE/SLMinDistance ecc...
update version 2.34
sep. 14th 2015
New bigger Display can be selected by user, as some users did request for it, useNewDisplayType=false will use the old display style..
update version 2.36
nov. 25th 2015
new version with the following new settings:
CODE: [SELECT ALL]
extern string genmang1="---ManageAllOpenTrades overwrites all others---";
extern bool ManageAllOpenTrades=true;
extern string genmang1a="---Set excludeMagicNumber to true---";
extern string genmang1b="---for excluding one MagicNumer using---";
extern string genmang1c="---ManageAllOpenTrades=true---";
extern bool excludeMagicNumber=false;
extern int MagicNumberToExclude=15;


just set excludeMagicNumber ti true and set MagicNumberToExclude to the MagicNumber you want to exclude, note this works with ManageAllOpenTrades=true
update version 2.38
dic. 7th 2015
New the APTM can too to PendingOrders , if wished set a missing SL or TP, you must set SetInitialSLtoForPendings and SetInitialTPtoForPendings to true and it will too set initial SL/TP if wished to your pending orders (works in combination with all other settings together).
update version 2.40
jan. 1st 2016
New the CloseAll function can use too if wished the FIFO rules just set useFIFOforCloseAll=true. Some minor code changes to make the user inputs easier to use.
update version 2.41
jan. 7, 2016
The CloseAll() function is completely rewritten, as some users notified problems using the FIFO closure on certain brokers, the new function should resolve all this problems.
update version 2.44
feb. 15, 2016
Thanks to mikejagg I spotted a bug causing that manual fix SL/TP where with some pairs calculated totally wrong, this is now fixed, so please all re-download to fix this problem, thanks Mike!
update version 2.48 January 14,2017
Thanks to a request from jedrula you can now exclude one or more symbols in a comma separated list from managing by APTM use for this the new input PairsToExclude in the section Manage Only By Selections
Too this version has some little cosmetic updates, as there is gone some time since the last update...
update version 2.49 January 14,2017
little cosmetic update, APTM shows now in the user display the excluded symbols
GER30H1.png

update version 2.50 September 20,2017
resolves the "Friday Close Problem" thanks to delay \":clap:\" see dclayw @ AllPairTradeManager(APTM)
update version 2.51 October 20,2017
Close Friday and DefinedTimeClose will now delete to all pending orders, as dclayw asked for this function.
update version 2.52 January 9,2018
work around to the "unable to set timer problem" thanks to Global \":clap:\"
update version 2.53 January 30,2018
Now you can manage a comma-separated list of magic numbers, not only one like it was in previous versions, when you select ManageByMagicNumber true and ManageAllOpenTrades to false (as this function overrides all settings)..
update version 2.55 January 31,2018
This version has full support, using a comma seperated ticket list, set ManageByTicketNumber to true and ManageAllOpenTrades to false (as this function overrides all settings).
update version 2.56 March 11,2018
Uppon user request I added an input voice, for the user choice to delete with Friday or defined time close pending orders or not.
CODE: [SELECT ALL]
extern string ForCLStes=" ---- Delete Pending yes or no ---- "; // ---------------------------------------------------------------------------
extern bool DeletePendingsWithClose=true;

milaneseAPTM_256.mq4
2018-04-28_17-57-58.png

Изменено 28 апреля, 2018 пользователем DENYA

[papalam72]

Народ, никто не пробовал связать доску 007 версии с SimEA Desk?
Или нужно просить автора SimEA добавить в код связь с новой доской? Ибо всеми правдами и неправдами отказывается видеть доску

[andriva]

Доски Multi v2 и v3 хорошо плюсуют но после закрытия по локу лок не сбрасывается и начинают каждую секунду открываться и закрываться ордера как это исправить?